SCHURTER’s first of its kind power entry module, series 5707, now offers IP 54 protection at the power input, in addition to IP 65 protection to the equipment. The sealed module is ideal for use in medical equipment exposed to leaks, drips and spills, as well as equipment subject to routine washing.

The compact module combines an appliance inlet, fuseholder, and standard or medical EMC filter rated up to 8 A at 250 VAC. The original 5707 offers IP 65 seal protection at the panel opening, around the fuseholders, and between the inlet and connector pins. The module can also be fitted with an additional gasket in the inlet cavity for IP 54 protection between the inlet and the cord connector. An optional retaining device prevents the power cord from unintentional disconnection.

The 5707 is cURus and ENEC approved. The appliance inlet complies with IEC/EN 60320-1; Fuseholders are shock-safe according to IEC/EN 60127-6, PC2. The module offers pre-wired electrical connections, using 6.3x0.8 quick connect terminals. Variations include: Class I, C14, or Class II, C18 appliance inlet; 1- or 2- pole fuseholders; front or rear mount mounting; Class I capacitors for increased voltage withstand. Delivery is stock to six weeks.

http://www.schurter.ch/pdf/english/typ_5707.pdf

DD series is most compact power entry design for safe power input

Schurter announced today the new DD11 and DD12 power entry modules as an extension to their existing snap-in and pcb mount counterparts. The new addition with mounting flange is offered for applications requiring screw mounting to the panel.

The DD series provides up to four functions packed into a 49 x 30 mm space saving package. The additional mounting flange supports horizontal mounting, thereby optimizing space while providing maximum functionality. The inlet portion of the unit (according to IEC 60320-1, style C14 or C18), integrates a fuseholder, switch and optional standard or medical EMC filter.

The DD series is especially suited for medical applications, designed to comply with IEC 60601-2. The fusedrawers are offered as 1 or 2-pole and accept 5 x 20mm fuses. An extra-safe feature prevents users from removing the fusedrawer while the power cord is plugged into the equipment. The medical filter limits leakage current to 5 or 80 uA respectively. The M80 version provides increased attenuation of electro-magnetic interference, yet still meets the leakage requirements for non-patient contact devices. The 2-pole switch offers an inrush current peak of 100 A capacitive for 3 ms and is available in both illuminated and non-illuminated versions.

The series is rated for currents up to 8 A at 125 VAC 60 Hz by UL/CSA, and 10 A at 250 VAC 50 Hz by IEC/EN. It is also suited for use in applications as described in IEC 60950, such as measurement, office, security and data communications equipment. The compact design makes it ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and IT and telecom infrastructures where equipment is continually downsized. Delivery is stock to 6 weeks.

http://www.schurter.ch/pdf/english/typ_DD11.pdf

The 5003 features a standard DC connector, offered in two different connector styles. The connector is encased with a 1-stage filter for currents up to 15 A at 125 VDC. The unit mounts to the equipment enclosure with a broad metal flange, thus providing a large contact area for optimal shielding and filter efficiency. The PCB mounting style version is available with optional snap feet to safely fasten the 5003 on the printed circuit board. The flexible wire leads allow an easy, fast and cost saving installation. Screw-on, snap-in and rivet mounting options are offered. The rear mount type with pre-threaded holes, as well as the snap-in, are designed specifically to reduce assembly time and save labor costs.

The series is ENEC and cURus approved and complies with IEC/EN 60950, standard for office and IT equipment. Applications include telecom and IT infrastructure equipment, data encryption machines but any other DC supplied equipment in industry automation.

Datasheet 5003

New EMC Products

EMC-Products

SelectorPower Entry Modules with Filter

SCHURTER's new series DD21 and DD22 power entry modules have been conceptually designed for PCB mounting. The DD21 product is equipped with multiple functions including inlet connector, switching and fusing. In addition, the DD22 series offers standard or medical filter versions. The compact design of this series makes them ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and other IT and telecom infrastructures where equipment is continually downsized.

The DD series can be equipped with 1- or 2-pole fuseholders for 5 x 20 mm fuse-links. The 2-pole switch, which is designed for inrush current peaks of 100 A capacitive for 3 ms, is available in both illuminated and non-illuminated versions. The DD21 is rated for currents at 8 and 10 A, while DD22 series is rated for currents at 1, 2, 4, 6, 8, 10 A. The power entry modules fulfill IEC/EN 60950 requirements and are ENEC and UL/CSA approved up to 10 A 250 VAC 50 Hz and 8 A 125/250 VAC 60 Hz respectively. Special configurations such as protection class II (IEC 61140) arrangements or filters with special X1 capacitors for increased dielectric strength are available.

The DD series uses M3 or self-tapping screws for mounting onto a PCB or M3 screws for mounting from the rear of the housing. The compact series requires minimal space having a board footprint of 65 mm wide by 34.6 mm deep, and panel cutout of 28.1 mm x 47.1 mm. Applications for this product include industrial PCs, digital audio applications, network routers, analog televisions and battery charging equipment. Delivery is stock to six weeks.

http://www.schurter.ch/pdf/english/typ_DD21.pdf

Schurter's C20F, DC12 and KFA power entry module product lines are extended to include filter cases with a solid metal flange. The products are designed to panel mount from the rear side for better grounding and optimal EMC shielding. They also allow for pre-wiring of the module before installation. The metal flange provides an ideal solution over traditional modules with plastic flanges. The solid metal contact of the metal flange with the panel eliminates the possibility of having EMI-producing slot antennas around the module. The modules are mounted with screws or rivets. A version with pre-drilled, threaded holes eliminates the nuts, automating assembly and minimizing costs.

Today, metal enclosures are being replaced with metallized plastic enclosures in order to reduce the cost and weight of the unit for increased portability. Medical equipment, in particular, demands more functionality in less space, while at the same time meeting stringent EMC requirements according to IEC 60601-1. The new power entry modules are available with low leakage medical filters M80, version for use in applications with indirect patient contact and the M5, version for use in applications with direct patient contact. The modules are also available with standard filters designed for use in IT applications according to IEC/UL 60950, where high filter attenuation is required.

All products are approved according to ENEC (<img src="/images/support/approvals/enec_vde.gif" width="30">) and UL

(<img src="/images/support/approvals/curus.gif" width="40"> ). Terminals are quick-connect 6.3 mm x 0.8 mm. Alternative options include wires (braided) or solder tabs. Additionally, the DC12 series, combining switch, inlet and filter is available in red or green illumination. Pricing for the modules vary, based on functionality.

http://www.schurterinc.com/pdf/english/typ_c20f.pdf

The new product line with the types FKH, FKI, FKHD, FKID consists of an appliance inlet type C14 according to IEC 60320-1 with a one- or two pole fuse holder for fuse links 5 x 20 mm and a two pole line switch and a one- or two stage line filter.The mentioned configuration satisfies the most frequent needs of our customers. The drawer of the fuse holder can be configured in different ways and the construction with one pole offers the possibility to mount backup fuses.The two-stage version of the filter suits especially for applications as measurement and audio equipment, where an optimal signal-to-noise ratio is aimed. Likewise the products fit for use in medical application according to IEC 60601-1 as well as for general applications in data communication or similar industrial applications according to IEC 60950.

http://www.schurter.ch/pdf/english/typ_FKH.pdf

Schurter announced today the new KFA snap-in power entry module as an adjunct to its popular screw mount counterpart. The elimination of mounting holes on the snap-in unit saves space and speeds assembly. The snapper design universally supports a range of panel thicknesses from 0.8 mm to 3.0 mm.

The KFA snap-in provides up to three functions, including an inlet, 1- or 2-pole shock-safe fusedrawer and EMC filter. The integrated unit provides a high performing, compact system for 1U devices where the load must be protected against overcurrent at the power source.

While the KFA series can be used in a variety of applications, it is especially suited for medical applications according to IEC 60601-2. The fusedrawers are offered as 1-pole, 2-pole, 1-pole with a spare fuse compartment, or 2-pole with a shorting bar in the neutral side. The 2-pole version provides additional safety by protecting both sides of the line - important when a non-polarized cordset is used. The fusedrawer is available in a finger-grip or extra-safe version. The extra-safe feature prohibits users from removing the fusedrawer while the power cord is plugged into the equipment. Standard or medical line filters are offered for rated currents of 1, 2, 4, 6 and 10 A. The medical filters, types M5 or M80, limit leakage current to 5 or 80 µA respectively. The M80 version provides increased attenuation of electro-magnetic interference, yet still meets the leakage requirements for non-patient contact devices.

The KFA is approved for 1-10 A at 125/250 VAC, 50/60 Hz, according to UL/CSA (<img src="../../images/support/approvals/curus.gif" width="40">) and IEC/EN (<img src="../../images/support/approvals/enec_vde.gif" width="30">). The series is also suited for use in applications as described in IEC 60950, such as measurement, office, security, data communication or similar industrial applications.

http://www.schurter.ch/pdf/english/Typ_KFA.pdf

Schurter recently added a snap-in version of its filtered AC connector designed for use in power supplies rated up to 20Amps at 125 Volts (16A/250V). The compact, integrated unit is designed to improve filter performance in applications with higher power demands.

The AC inlet is designed according to IEC 320-1, type C20, and is combined with a standard or medical grade filter. The combination supplants discrete block filters that are rated between 15-20 Amps. Attenuation is improved by eliminating the bulky wires between the connector and the filter. A better direct path to ground is also achieved. The filter is available with a typical surge withstand (>2.5 kV, L-N), or with added surge capability (>4 kV, L-N).

The C20F is ideally suited for power supplies and distribution units with power ratings up to 3500 Watts. Applications include information technology according to IEC/EN 60950 and medical equipment according to IEC/EN 60601. The C20F is also suited for general industrial applications that would benefit from the convenience of a removable cord.

http://www.schurter.ch/pdf/english/typ_C20F.pdf

Power supply requirements are changing dramatically, forcing designers to use smaller, more efficient solutions. Especial attention should be given to the aspects: power density, quality, reliability, efficiency, handling, thermal behavior and electro magnetic compatibility (EMC).The power entry module DC12 from SCHURTER is anIEC/EN 60320-1 appliance inlet C14 with a 1- resp. 2-pole line switch and a line filter, which is designed for the mentioned requirements.The DC12 is made especially for high inrush currents and is suitable for high transient loads. The EMC line filters are available in the standard rated currents for standard and medical versions and the single components are already wired to keep your number of components low in the power supply. The same assembling dimension for 1- and 2-pole line switch version as well as the screw-on and snap-in mounting offers you a variety of designs and optimal safety for your application. The DC12 is approved to 10A, 125/250 VAC, 50/60 Hz according to ENEC, UL, CSA and is suitable for use in equipment according to IEC/EN 60950. The products are perfectly suitable for the usage in sophisticated power supplies especially in IT, medical and measuring as well as in other industrial equipment.

http://www.schurter.ch/pdf/english/Typ_DC12.pdf

The new Power Entry Module EF12, the perfect combination of an appliance inlet, a line-filter and a circuit breaker for equipment suitable for high currents up to 16A IEC/EN, 20A UL/CSA!The EF12 contains: appliance inlet 16A according to IEC/EN 60320-1, circuit breaker for equipment and a line-filter (12/16 A IEC/EN; 12/16/20 A UL/CSA). The circuit breaker for equipment interrupts the electric circuit by overload current up to 20A, and works at the same time as a ON/OFF switch. Optional available: without overload protection, with a remote trip or undervoltage releaseThe additional EMV-shield helps to a troublefree function of your equipment. Further advantages are the reduction of the production costs due to the wired elements and the compact measurements of the EF12. Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, file servers, bar coding equipment and power supplies.

http://www.schurter.ch/pdf/e_d/c_ef12.pdf

The EC12 combines in a compact way three modules: appliance inlet, line-switch and now – new – with a standard or medical line-filter!The EMV-shield contributes to a troubleless function of your equipment. Due to the wired elements, you can save production costs. The mounting is a lot easier and faster thanks to the practical combining of three singles elements into one only.The EC12 applies for high currents up to 16A, resp. 20A. It is pending the approval VDE up to 16A at 250 Volts and UL&CSA up to 20A at 125 and 250 Volts. The new EC12 is the completion to the already in December 2001 launched EC11.Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, bar coding equipment, and power supplies.

http://www.schurter.ch/pdf/english/typ_ec12.pdf

5145 - with filter

6145 - without filter

Schurter's latest power entry innovation combines a filtered AC inlet and circuit breaker, expanding its conventional range to include a manual reset option for primary circuit protection. Circuit breaker options include 1 or 2-pole thermal overcurrent protection, or no bi-metal for 2-pole on/off switching only. Filter options include standard and medical grade with improved performance at higher frequencies. Current ratings range from 1-15 Amps at 250 Volts.

http://www.schurter.ch/pdf/english/typ_6145.pdf