The Transipillars, consisting of studs and inserts molded in a nylon body, are known for providing a rugged insulating mounting system. The parts are available as stud-stud version, stud-insert or insert-insert combinations in cylindrical or hexagonal form. The combination of various lengths and metric threads allows the SCHURTER spacers to be used flexibly: The Transipillars are suitable for providing a versatile rugged insulator for multistage PCB separation, for chassis mounting of drives and motors or for any general electromechanical application. Customized versions are available on request.

Transipillars, Spacers

Datasheet Transipillars

The V-Lock locking system can be used for 10A and 16A power inlets and connectors according to IEC 60320. This system works in such a way that there is a pin in the socket, interlocking with a notch in the plug and thus prevents an unintentional pullout of the power cable.The advantage of this system is that there is no need for a specific socket system or retaining device that has to be adapted and built-in.

The locking is released by pressing on the releasing lever. This lever is easily detected by its bright yellow colour and thus distinguishes this system from existing power cable connections. The extraction force is a minimum of 200 N. Typical applications are in medical appliances, analysis and laboratory instruments, Telecom and IT- devices, power distribution or radio and TV-studios.

Connectors (Inlets/Outlets)V-Lock

Power Entry Modules without FilterV-Lock

Power Entry Modules with FilterV-Lock

Cord SetsV-Lock

SCHURTER's new series DD21 and DD22 power entry modules have been conceptually designed for PCB mounting. The DD21 product is equipped with multiple functions including inlet connector, switching and fusing. In addition, the DD22 series offers standard or medical filter versions. The compact design of this series makes them ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and other IT and telecom infrastructures where equipment is continually downsized.

The DD series can be equipped with 1- or 2-pole fuseholders for 5 x 20 mm fuse-links. The 2-pole switch, which is designed for inrush current peaks of 100 A capacitive for 3 ms, is available in both illuminated and non-illuminated versions. The DD21 is rated for currents at 8 and 10 A, while DD22 series is rated for currents at 1, 2, 4, 6, 8, 10 A. The power entry modules fulfill IEC/EN 60950 requirements and are ENEC and UL/CSA approved up to 10 A 250 VAC 50 Hz and 8 A 125/250 VAC 60 Hz respectively. Special configurations such as protection class II (IEC 61140) arrangements or filters with special X1 capacitors for increased dielectric strength are available.

The DD series uses M3 or self-tapping screws for mounting onto a PCB or M3 screws for mounting from the rear of the housing. The compact series requires minimal space having a board footprint of 65 mm wide by 34.6 mm deep, and panel cutout of 28.1 mm x 47.1 mm. Applications for this product include industrial PCs, digital audio applications, network routers, analog televisions and battery charging equipment. Delivery is stock to six weeks.

http://www.schurter.ch/pdf/english/typ_DD21.pdf

The power entry module series DC11, DC12, DC21, DC22, DD11, DD12, DD21, DD22, KM and KMF from SCHURTER, are extremely compact and robustly designed. The excellent performance makes them suitable for nearly any application using detachable power.

The series are equipped with multiple functions including IEC appliance inlet C14 and switch, specifically with or without fuseholder. These lines are available either with or without EMC line filter. The compact design makes these series ideally suitable for the use in equipment with limited space and more demanding electrical and mechanical requirements. Areas of applications include IT and telecom particularly one rack unit (1RU) enclosures as well as medical, office and automation. The series are designed to be mounted on panels with screw or snap mounting method or they are specifically produced for PCB mounting. The filtered versions have a broad metal flange, ensuring optimal contact to the appliance chassis for ideal shielding and filtering. The filtered versions with reduced leakage current are specifically available for medical applications.

The series are ENEC and cURus approved and comply with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Datasheet DC11

Datasheet DC12

Datasheet DC21

Datasheet DC22

Datasheet DD11

Datasheet DD12

Datasheet DD21

Datasheet DD22

Datasheet KM

Datasheet KMF

Connectors

EMC Products

Connectors

EMC Products

Power Entry Modules without Filter

Single Phase Block Filters

Medical Equipment

SCHURTER expands the product service for its connector families with a wire harness service offering. The large SCHURTER product assortment of IEC connectors and filter products can now be ordered together with a complete interconnection solution according to customer specific requirements through SCHURTER's website.

SCHURTER delivers custom fit wire harness and cables with its components. The wire harness service includes several types of ready to install wires, cables or wire harnesses with custom specific end terminal connections. The SCHURTER products such as IEC 320 connectors and filter products with quick connect, solder or screw on terminals can be assembled with above custom specific interconnection solutions. Products which are already available with integrated wire connections can be furnished with custom specific wire lengths and cable end terminals. Initial product samples will be assembled and provided for customer approval. Accordingly smaller and larger quantities can be manufactured and delivered. The wire harness service for other products such as fuseholders, voltage selectors, and switches will be expanded in the near future.

Further details about SCHURTER’s wire harness options can be found on our website. The inquiry form on the website captures your wire harness project details and will be submitted directly to SCHURTER.

Wire Harness

New Connectors

Connectors

contact@schurter.ch

Searching for suitable equipment connectors (appliance couplers)

basically means selecting the connector parameters according to IEC 60320. The search for connector options

on the SCHURTER Website, which can be performed from the most diverse perspectives and several points of departure, will yield a manageable selection of products within a very short amount of time. The information on the Website and on the respective product fact sheets will quickly and easily produce exactly the counterparts you need.

SCHURTER offers the largest portfolio of appliance couplers according to IEC 60320 as well as the corresponding power supply and interconnection cords

, which, for better clarity, is divided up into several functional groups such as: connectors, distribution units, power entry modules with and without filter, cord connectors or cord sets. The product search within these functional groups can be narrowed down further by selecting the corresponding product characteristics (Web selectors).

All of the over 2,000 possible connector combination/mating options (all based on IEC connector parameters) are now available under parametric search

. This allows customers to search for equipment connectors from the most diverse perspectives. Furthermore, under General Information, you are told exactly which standard each component is in compliance with and how the terminology associated with a given product is to be interpreted.